ISSN:2582-5208

www.irjmets.com

Paper Key : IRJ************328
Author: Miss.vibhute Aishwarya Vitthal,Mr.shinde Shubham Babasaheb,Prof. Joshi.a.a
Date Published: 07 Jan 2023
Abstract
AbstractIn this project, we will measure the pulse rate and blood oxygen level using a pulse oximeter sensor. This pulse oximeter is designed by using a pulse oximeter sensor which consists the one IR light and one RED light and another photodiode and the other photodiode is used on the same side. When this light falls on the finger then the light bombards blood from the finger and then it reflects, that reflected signal is received by the photodiode. The photodiode converts light energy into electrical form and is fed to the ATmega328 Microcontroller. That will take the signal and shows pulses and oxygen saturation on LCD. KeywordsMeasuring heart rate and blood oxygen level; Reflectance pulse oximeter; non-invasive blood oxygen saturation
DOI LINK : 10.56726/IRJMETS32816 https://www.doi.org/10.56726/IRJMETS32816
Paper File to download :